Opening Your Pool

Opening Your Pool

Doing it the right way can mean the difference between a summer of fun and a summer of headaches! Follow these easy and important steps to ensure a smooth, carefree pool opening in the spring. And remember, your local BioGuard® Dealer is always ready to assist with information tailored to your specific pool care needs.

1. Remove pool cover (skip this step for new pools)

Drain off any accumulated water on the cover away from your pool. Once removed, clean to prevent sticking and odours. Store in a dry place, free of debris and protected from the sun and weather.

2. Fill your pool

Your pool should be filled to the middle of the skimmer opening to allow for proper circulation.

3. Check your pump, skimmer basket and filter

4. Get your water tested

Be sure to circulate pool water 24 to 48 hours before taking a water sample. Use a clean plastic container, provided by your BioGuard dealer, to scoop from elbow-depth about one quart of water. Seal the container and take it to your BioGuard Dealer for testing and analysis.

BioGuard pioneered the idea of computerized water analysis. Over the past 25 years, we have used our resources to research, develop and refine the science of water analysis. Today ALEX, our computerized water analysis system, provides accurate results almost instantly. You will receive personalized instructions for starting your pool with step-by-step instructions.

5. Test sanitizer and pH

You can test sanitizer and pH levels yourself using the BioGuard 1200V Test Kit or BioGuard Test Strips to check free chlorine, total bromine residuals and pH levels and total alkalinity. Use the following chart to determine proper levels.

Free Chlorine residual: 1.0 to 3.0 ppm

Total Bromine residual: 1.0 to 3.0 ppm

pH: 7.4 to 7.6 is ideal range (7.2-7.6 is acceptable)

Total Alkalinity: 125 to 150 ppm

Calcium Hardness (plaster pools): 200 to 275 ppm

Calcium Hardness (all other types): 175 to 225 ppm

6. Routine maintenance

Routine maintenance is the best way to maintain your pool. And with one of BioGuard's Smart PAK kits or salt-based systems including Mineral Springs® and SaltScapes® we have you covered!


Article Written By: BioGuard - The Trusted Pool Care Experts

Reading next

How to use the BioGuard® System
How to use the BioGuard® System

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.